Aspire brings you yet another kit with awesome flexibility and lots of power. Introducing the new 200W Dynamo Kit with theNephoas the featured tank, powered by dual 18650, 21700, or 20700 batteries. The Dynamo can be used in various modes, allowing you to easily select between wattage, voltage, bypass, CPS (C1/C2/C3), TC (Ni/Ti,SS316L), and TCR (M1/M2/M3).
Even though the Dynamo is a dual battery mod, it is still quite ergonomic and comfortable to hold thanks to its rounded sides and corners. With an output wattage of up to 200W regardless of which battery type is used.
Dimensions: 137mm x 49mm x 34mm
Tank Capacity: 4mL
Max Wattage: 200W
Battery: 2 x 18650 / 2 x 20700 / 2 x 21700
THE NEPHO TANK - The Nepho comes fitted with Aspire’s Kanthal Mesh Nepho Coil rated at 0.15 ohms, and also includes a Kanthal 0.5 ohm coil; both are ‘press fit’ for ease of replacement. Both coils have phenomenal wicking capability, which ensures increased vapor and flavor, just as you’d expect from Aspire innovations. With the improved flavor and vapor production you can form your own mini weather system each time you vape!
Nepho Mesh 0.15Ω Coil
Nepho 0.5Ω Coil
COIL INSTALLATION - Coil installation couldn't be easier. Simply unscrew the base hardware, pull out the used coil, and replace it with a new one by plugging it in. Replace the hardware base by screwing back on and you're done. The 'press to fit' Nepho coils are so much less messy to handle when replacing.
FILLING THE TANK - Aspire has incorporated a safer child-lock mechanism on the tank. Pull up the top cap by placing your thumb on the top cap right above the triangle symbol and pushing until the filling hole is revealed. Add your choice of e-liquid into the tank through the filling hole and push the top cap back into place and push the top cap down to lock. Note: As usual when using a new atomizer, let the tank stand for 5 minutes after filling so the cotton can be saturated with e-liquid before use.
AIRFLOW - The triple slot airflow allows you to easily adjust your own vaping style and preference. The Nepho Tank ensures great flavor at all settings with a wide bore delrin drip tip, ensuring comfort. The large wicking ports in both the standard coil and mesh coil makes sure the tank 'breathes' easily with little chance of dry hits and saturated, delicious flavor.
BATTERY INSTALLATION - Turn off the MOD and remove tank. Pull the lock catch to allow the battery door to open. When replacing the batteries, please pay attention to the correct positive and negative connections. Then insert the battery of your choice, 18650 (use the supplied silicon adapter), 20700 or 21700. Insert the batteries as seen in the diagram and close the battery door, ensuring the door catch is securely fastened.
Please Note: Due to the mod being designed to be compatible with 21700 batteries, when using 20700 batteries in this mod, there will be a 1mm gap. So if you shake your mod vigorously, which is hopefully OBVIOUSLY not recommended, you may hear a rattling sound, however it will not in any way effect the performance or function of the mod.
MOD SCREEN, SETTINGS, AND MODES - The very clear, large, circular screen and interface allows access to adjust the values of different output modes, data, system, time, and about. Simple to navigate and easy to use.
WATCH UI - Press the fire button to enter. When you are in 'Time Set' press the fire button to choose the value you want to adjust. Press up or down button to change the values and to turn the watch on or off. Enter Watch UI to choose your preferred watch UI displayed on your mod. We've created 11 different types to choose from!
SAFETY FEATURES - The Dynamo comes with all the safety features that Aspire is famous for including automatic cutoff, short circuit protection, over discharge protection, overcharge protection, overheat protection, and battery reverse protection.
CHARGING - Charging the mod can be done via Micro USB charging port with a max current of 2A. When connecting the mod to the charger, the screen will display two growing battery icons with the 2 circular rings around the screen edge showing a rotary movement when charging. The screen also displays the battery percentage, charge time, and charging current. Once the battery level reaches 4.2V or when it's fully charged, the mod will stop charging and the screen will shut off. The mod will not charge when the batteries are incorrectly installed or when there's only one battery installed. The batteries cannot be replaced while charging - unplug the charging cable before changing the batteries.
1* Dynamo mod / 1* Nepho Tank / 1* Glass tube / 8* O-rings / 2* Coils (1*0.5Ω & 1*0.15Ω Mesh Coil) / 1* USB Cable /