Hohm Work 2 18650 2547mAh 3.6V Li-NiMn Battery (PAIR)
Say hello to the successor of the successor of Hohm Work 18650. We proudly introduce the Hohm Work V2 (unofficially the V2.2). Phenomenal sustained amperage and voltage delivery under heavy load in a 18650 (18mm x 65mm) cell. These are rated by Indonesia Chemistry at 2547mAh capacity, with a CDR of 25.3A with an 80C cut-off limit amperage of 35.8A (Yes, 35.8A!!!). All ratings are subject to meet and/or exceed strict limitation policies set forth for DLr*1, TID*2, PVDL*3, CLR*4 mΩR*5, and Temperature (°C). Hohm Work2 is built with trade-secret QSP Li-NMC formula. The ratio and chemistry concentration achieves unprecedented capabilities.
Every Hohm Tech cell model has been tested and certified by the rightful authorities/laboratories and accredited entities to achieve certification of MSDS, CE, IEC, ROHS, UN38.3, Specifications, Air/Sea DG Transport, and PLI. We do not cut corners. Hohm Tech delivers what’s promised… chart topping performance, capacity, consistency, and safety. These cells are built specifically for intense & power-hungry devices that require consistent amperage delivery to operate as intended. Not only was power & capacity a priority, but safety measures were at the forefront of it all.
Max Charge Rate: 4.4A
Continuous Discharge Rate: 25.3A
80C cut-off limit: 35.8A
Max Safe Cut-Off: 2.5V
Cycle Life Retention: 500 Cycles (≥70%), 1000 (≥57%)
Chemistry Type: QSP Li-NMC INR Foundation
Spec. Sheet in Hohm Tech’s Download Center: Yes
KEEP OUT of reach of children and pets.
ALWAYS use matching set of batteries. NEVER use or mix different brand of cells to power same device.
DO NOT expose to temperatures over 100C (212F) EVER
DO NOT store or carry batteries unprotected. DO NOT put in pocket. Use a protective battery case.
DO NOT use lower resistance (Ω) # OR exceed any cell limitation as indicated on every Hohm Tech cell.
DO NOT install, use, or charge backwards or improper configuration.
DO NOT use a battery that has ANY dents, tears, punctures, or any other damage at all to its structure or outer label wrapping (risk severe burn injury). Inspect each battery carefully before every use. This ensures safe, reliable, consistent operation, and functionality.
DO NOT use if hot to touch. Risk severe burn injury and explosion.
DO NOT charge over 4.2v or discharge below specified cut-off volts as indicated in specification sheets (available on Hohm Tech website in the ‘Download Center’).
HAVE space or non-conductive barrier between batteries at all times.
LITHIUM ION batteries have inherent risks that can cause severe burn injury, fire, explosion, and battery failure if not handled and used in accordance to an application’s power requirements and/or within the battery capabilities. Read specification sheets’ cautions, warnings, and prohibitions, as well as the brochure (available in Download Center of Hohm Tech website www.hohmtech.com).